 |
 |
click here for leaflet |
   |
The AquaPro Range has been constructed using the very latest computer aided design and manufacturing systems available, in our own Yorkshire factory. As a result of this technology, all the service and repair parts are very accessible and easy to maintain with no compromise to the striking appearance. The AquaPro is a heavy-duty, no-nonsense machine and must not be confused with lower level imported equipment, at SystemWash we design our machines through experience and every machine is assembled to the same exacting high standard and tested thoroughly before it leaves our factory; quality, reliability and value are the key factors. Quality Without Compromise |
| Built onto a heavy-gauge powder coated Zintec Steel chassis with twin axles and 10” wheels for durability and stability, AquaPro features a large capacity on-board water tank with type A air gap and a WRAS approved hi-flow ball valve to BS 1212. The whole machine is wrapped with a polished 304 grade stainless steel cover; stainless steel plays an important role in SystemWash machines because of its durability, rigidity and anti corrosion properties. Motor All AquaPro units feature a direct drive four-pole electric motor running at 1400 – 1450 RPM, incorporating squirrel cage rotor construction and bi-directional cooling fan providing maximum efficiency. |
|
| Pump All AquaPro machines are fitted with top quality industrial pumps featuring a 3-piston ceramic plunger system, long-life hardened crankshaft and oil immersed bearing profile. All the wetted parts are constructed of brass or stainless steel ensuring Maximum anti-corrosion properties. The whole range is equipped with the unique F.S.A. System. This comprises of a special flow-sensitive Regulator, which ensures pressure does not remain trapped in the high-pressure line during bypass operation or shut-down mode. Low voltage controls (24v) have been fitted as standard to achieve maximum operator safety, complemented by a fully automated, timed total shut-down system with mains interruption release and thermal overload protection for motor. Low-level fuel cut-off is standard on all AquaPro models. |
|
| AquaPro machines are superb, providing long-term reliability, durability and optimum performance. In short, an investment. | |
| Connections | |||||||||
|
|||||||||
| All AquaPro machines are supplied complete with 9 Metres of quality 2 wire high pressure hose, heavy duty trigger gun and 900mm lance. | |||||||||
| Specifications | ||||||||||
| Model | Flow | Working Pressure |
RPM | Power | Run | Load | Weight | List Price |
||
| LPM | Bar | Volts | Amps | Kw | Kilos | |||||
| AquaPro1 | 12.5 | 90 | 1450 | 230 | 13 | 2.3 | 68 | £1,695 | ||
| AquaPro 3 | 15 | 190 | 1450 | 400 | 13 x 3 | 5.6 | 80 | £1,795 | ||
| Key Features | |||||||||||||
| Model | Motor HP |
H. P. Chem- ical |
Pres- sure Red |
Water Tank Capacity (ltr) |
Pump | Timed Total Stop |
24 volt Controls |
Chemical Solenoid |
|||||
| AquaPro 1 | 3.0 | opt | opt | 10 Litres | Hawk 240 i | std | std | opt | |||||
| AquaPro 3 | 7.5 | opt | opt | 10 Litres | Hawk 506 | std | std | opt | |||||
